| 3001 | Try moving the charge base to another location on this floor. The charge base is best placed in areas close to walls and identifiable furniture. | This area doesn't have enough nearby walls or furniture for the robot to recognize it in the future. Please move the charge base and try again. |
| 3002 | This area looks too similar to an existing map. Try moving the charge base to another location on this floor. | This map looks too similar to an existing map. Please move the charge base to another location on this floor and try again. |
| 3003 | ||
| 3004 | I'm unable to download the right map. Try checking your Wi-Fi connection. | the robot had trouble loading the map. Check your network and try cleaning again. If the problem persists, please contact Customer Care. |
| 3005 | I'm unable to download the right map. Try checking your Wi-Fi connection. | the robot had trouble loading the map. Check your network and try cleaning again. If the problem persists, please contact Customer Care. |
| 3006 | I'm unable to recognize the area. Please try placing the robot on base or clean without No-Go zones. | the robot had trouble figuring out the location. Try placing the robot on base and retry or clean without No-Go zones. |
| 3007 | I'm unable to recognize the area since I started off the charge base. Place me on the charge base. | Your robot can't recognize this area. Please open the app for more information. |
| 3008 | the robot didn't recognize the cleaning area, so it didn't complete the clean. Please open the app for more information. | |
| 3009 | This floor looks too similar to another floor plan. Check if the environment near the base has changed and try cleaning again. | |
| 3010 | Looks like this zone is located on a different floor. Place me on the right floor and try again. | Your robot can not clean the zone. It might be located on a different floor. Please place the robot on the correct floor and try again. |
| 3011 | I can't complete the designated cleaning zone since my path is blocked by a No-Go Zone or an obstacle. Try removing anything that might be preventing the cleaning. | The robot was unable to reach a zone. Please check for any No-Go Zones or obstacles that may be obstructing its path. |
| 3012 | I'm unable to reach the zone since my path is blocked. | The robot was unable to reach a zone. Please check for any No-Go Zones or obstacles that may be obstructing its path. |
| 4001 | There is a problem with one of the robot's sensors. Please contact Customer Care. | |
| 4002 | There is a problem with one of the robot's sensors. Please contact Customer Care. | |
| 4003 | Your robot is experiencing an internal motherboard error. Please contact Customer Care. | |
| 4101 | There's a problem with my navigation sensor. I need to be restarted. | Restart the robot by pressing and holding the play button for 5 seconds to power off, then press and hold the play button for 2 seconds to power back on. |
| 4102 | There's a problem with my navigation sensor. I need to be restarted. | Restart the robot by pressing and holding the play button for 5 seconds to power off, then press and hold the play button for 2 seconds to power back on. |
| 4103 | the robot's sensor may be stuck. Please clear the robot's path or contact Customer Care. | |
| 4104 | the robot had a internal error. Try rebooting and call Customer Care if that does not resolve the problem. | |
| 4105 | the robot had a internal error. Try rebooting and call Customer Care if that does not resolve the problem. | |
| 4201 | My battery is too hot and needs to cool. Place me in a cool area and try cleaning again later. | the robot powered off because the battery is too hot. When the battery cools down it will resume cleaning. |
| 4202 | My battery has a problem and needs to be replaced. Contact Customer Care. | the robot's battery has a problem and it needs to be replaced. Please contact Customer Care. |
| 5001 | My dirt bin is full, and needs to be emptied. | Your robot's dirt bin is full. Please empty the dirt bin. |
| 5002 | My filter needs to be replaced. | It's time to replace your robot's filter. |
| 5003 | My brush needs to be replaced. | It's time to replace your robot's brush. |
| 6001 | please contact Customer Care. | |
| 7002 | Connection verified. | Press down on the information button. Authenticate your robot by pressing down on the information button. The Wi-Fi icon should start pulsing and a sound will occur. |
| 7003 | Connected. Updating my software. | - |
| 7100 | I'm ready to clean. | Robot has enough charge to start cleaning |
| 7101 | Implementing quickboost. I'm returning to the dock to charge and will complete the clean later. | Once your robot has enough battery, it will automatically begin the cleaning run. If you don’t want your robot to automatically clean, cancel the clean. |
| 7102 | My battery is low. Place me on the charge base so I can recharge. | Place the robot on the charge base. |